RRU7001-9dBi/RRU5001-9dBi/RRU3001-9dBi is a high-performance UHF RFID integrated Reader, designed with fully proprietary intellectual property rights. It combines a proprietary, efficient signal processing algorithm that maintains a high identification rate while achieving rapid read/write processing of RFID tags. Its flexible multi-interface design ensures seamless interoperability between interfaces, making it widely applicable in various Radio Frequency Identification (RFID) systems such as logistics, access control systems, anti-counterfeiting systems, and production process control.
Model
Size
RRUx001-9dBi
FEATURES
l Self-intellectual property;
l Designed with IMPINJ E710/E510/E310 and support ISO18000-6C(EPC C1G2) protocol tag, featuring excellent multi-tag anti-collision functionality;
l 865~868MHz/902~928MHz frequency band(frequency customization optional);
l FHSS or Fix Frequency transmission;
l RF output power up to 33dbm(adjustable);
l Built-in 9dBi circularly polarized antenna, with typical reading distance of 13 meters*;
l Supports multiple working modes such as active mode and answer mode;
l Support RSSI;
l Low power consumption design, powered by +9 ~ +24V DC, with POE optional;
l Supports interfaces such as RS232, RS485, Wiegand, GPIO, TCPIP, with optional WIFI/BT, USB2.0, 4G, etc.;
l High reliability design, meet the requirements of harsh working environment;
l Support on-the-site firmware upgrading.
*Effective reading distance and tag interrogation speed are directly related to the antenna, tags, and the working environment.
CHARACTERISTICS
l Absolute Maximum Ratings
ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC | 26 | V |
Operating Temp | TOPR | -20 ~ +60 | ℃ |
Storage Temp | TSTR | -20 ~ +70 | ℃ |
l Specifications
Under TA=25℃,VCC=+9V unless specified
ITEM | SYMBOL | MIN | TYP | MAX | UNIT |
Power Supply | VCC | 9 | 9 | 24 | V |
Operating Current | IC | 420 | 80（standby） | 970(30dBm) 1180(33dBm) | mA |
Operating Frequency | FREQ | - | 865~868(ETSI) 902~928(FCC) | - | MHz |
RF Output Power | PRF | 5 | 33 | dBm | |
Receiver Sensitivity | SR | -74(using E310) -81(using E510) -87(using E710) | dBm |
INTERFACE
1．Power Supply (Model 5525)
NO. | SYMBOL | DESCRIPTION |
Central | PWR | +9 ~ +24V Power |
Outer | GND | Ground |
2. RS232 （DB9 Female）
NO. | SYMBOL | DESCRIPTION |
1 | NC | Reserved |
2 | TXD | Serial communication data output |
3 | RXD | Serial communication data input |
4 | NC | Reserved |
5 | GND | Ground |
6 | NC | Reserved |
7 | NC | Reserved |
8 | NC | Reserved |
9 | NC | Reserved |
3． RS485 (3*3.5mm Green Terminal Block)
NO. | SYMBOL | DESCRIPTION |
1 | A | RS485 Interface A |
2 | B | RS485 Interface B |
3 | EGND | Earth Ground |
4． Wiegand (3*3.5mm Green Terminal Block)
NO. | SYMBOL | DESCRIPTION |
1 | GND | Ground |
2 | DATA1 | Wiegand Data1 |
3 | DATA0 | Wiegand Data 0 |
5． Output (4*3.5mm Green Terminal Block)
NO. | SYMBOL | DESCRIPTION |
1 | NO1 | Normally Open terminal of Relay 1 (can be customized to output power voltage as per customer requirement) |
2 | COM1 | Common terminal of Relay 1 |
3 | NO2 | Normally Open terminal of Relay 2 (can be customized to output power voltage as per customer requirement) |
4 | COM2 | Common End of Relay 2 |
6．Input (3*3.5mm Green Terminal Block)
NO. | SYMBOL | DESCRIPTION |
1 | GND | Ground |
2 | INPUT1 | Input 1 with low level 0 ~ +1V, high level +2.5 ~ +12V (threshold can be customized according to customer requirements) |
3 | INPUT2 | Input 2 with low level 0 ~ +1V, high level +2.5 ~ +12V (threshold can be customized according to customer requirements) |
7．TCPIP Network Interface RJ45
MECHANICAL DATA (UNIT:mm)
ACCESSORY
Remark:
1. Specifications are subject to change, please pay attention to our latest version.
2. Shenzhen RoyalRay Science and Technology Co., Ltd. reserves the right to the final interpretation of the above terms.