RRU1612DK-K9U is a high-performance, cost-effective UHF USB desktop reader/writer. Designed with fully independent intellectual property rights and proprietary efficient signal processing algorithms, these platforms maintain a high tag reading rate while enabling fast read/write processing of RFID tags. They can be widely used in various RFID systems such as retail, asset management, logistics, anti-counterfeiting, and production process control.
Model
Size
FEATURES
lSelf-intellectual property;
lSupport ISO18000-6C(EPC C1G2) protocol tag;
l865~868MHz/902~928MHz frequency band(frequency customization optional);
lFHSS or Fix Frequency transmission;
lRF Output power up to 26dBm (adjustable);
lBuilt-in antenna, typical reading effective distance <80cm*;
lTag buffer size up to 330PCS@128bits EPC or 100PCS@496bits EPC;
lSupports USB 2.0 interface (virtual COM port mode and emulation keyboard mode), optional Bluetooth support;
lLow power dissipation with USB power supply, Support RSSI;;
lProvide DLL and Demonstration Software Source code to facilitate further development.
lSupports firmware upgrades.
*Effective reading distance and tag interrogation speed are directly related to the antenna, tags, and the working environment.
CHARACTERISTICS
l Absolute Maximum Ratings
ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC | 6 | V |
Operating Temp | TOPR | -20 ~ +60 | ℃ |
Storage Temp | TSTR | -20 ~ +70 | ℃ |
l Electrical and Mechanical Specification
Under TA=25℃,VCC=+5V unless specified
ITEM | SYMBOL | MIN | TYP | MAX | UNIT |
Power Supply | VCC | 5 | V | ||
Current Dissipation | IC | 50(26dBm) | mA | ||
Frequency | FREQ | - | 865~868(ETSI) 902~928(FCC) | - | MHz |
RF Output Power | PRF | 5 | 26 | dBm | |
Receive Sensitivity | SR | -70 | dBm |
INTERFACE
ITEM | SYMBOL | DESCRIPTION | REMARK |
Bluetooth LED | BT | The indicator light stays on when Bluetooth is successfully connected. | BLUE |
Operation LED | WORK | On power-up, the indicator flashes once, then turns off; The indicator flashes when communicating via Type-C or Bluetooth. | GREEN |
Power LED | PWR | The indicator stays on after power-up. | RED |
USB | TYPE-C | Type-C USB2.0 | |
BUZZER | BEEP | On power-up, the buzzer sounds once, then remain silent. The buzzer beeps when a tag is scanned. |
Depending on the model and configuration, the power supply, communication, and indicator lights on the device may vary slightly. Please refer to the actual product for details.
MECHANICAL DATA (UNIT:mm)
ACCESSORY
Remark:
1. Specifications are subject to change, please pay attention to our latest version.
2. Shenzhen RoyalRay Science and Technology Co., Ltd. reserves the right to the final interpretation of the above terms.