RRU9816 is a high performance UHF RFID reader. It is designed upon dedicated RFID Engine ASIC with fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, anti-counterfeit and industrial production process control system.
Model
Size
RRU9816
FEATURES
l Self-intellectual property;
l Support ISO18000-6C(EPC C1G2) protocol tag;
l 902~928MHz or 865~868MHz frequency band(frequency customization optional);
l FHSS or Fix Frequency transmission;
l Effective range from 10~300cm (adjustable according to real application need);
l Multiple tag anti-collision>50pcs/s;
l Multiple tag inventory speed>50pcs/s;
l Tag buffer size: 370PCS@Max.128bitsEPC or 120PCS@Max.496bitsEPC;
l Low power dissipation with USB power source or external single +9 DC power supply;
l Support RSSI;
l Support 2 GPIO;
l Support USB (VSP mode), RS232, Wiegand (optional) and USB HID (keyboard emulation)
l High reliability design without extra heat-sinking measure;
l Support on-the-site firmware upgrading.
CHARACTERISTICS
l Absolute Maximum Ratings
ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC（USB Power Source） | 6 | V |
VCC（External Power Source） | 12 | ||
Operating Temp | TOPR | -20 ~ +60 | ℃ |
Storage Temp | TSTR | -20 ~ +70 | ℃ |
l Electrical and Mechanical Specification
Under Ta＝25℃, VCC＝+5V unless specified
ITEM | SYMBOL | MIN | TYP | MAX | UNIT |
Power Supply | VCC | 4.5 | 5 | 6 | V |
9 | 9 | 12 | |||
Current Dissipation | IC | 180 | 200 | mA | |
Frequency | FREQ | - | 865~868(ETSI) 902~928(FCC) | - | MHz |
RF Output Power | PRF | 0 | 26 | dBm | |
Receive Sensitivity | SR | -70 | dBm |
INTERFACE
1.Socket Definition
No. | Symbol | Comment |
1 | VCC | External +9V power supply |
2 | GND | Ground |
3 | TXD | RS-232 serial data output |
4 | RXD | RS-232 serial data input |
5 | GND | Ground |
6 | GPIO1 | GPIO1 or Wiegand Data 0 |
7 | GPIO2 | GPIO1 or Wiegand Data 0 |
8 | GND | Ground |
2.Switch Definition
No. | Symbol | Comment |
1 | SEL_USB | Switch on to enable USB interface |
2 | SEL_USB | |
3 | SEL_RS232 | Switch on to enable RS232 interface |
4 | SEL_RS232 |
MECHANICAL DATA (UNIT: mm)
ACCESSORY
Remark:
1. Specifications are subject to change, please pay attention to our latest version.
2. Shenzhen RoyalRay Science and Technology Co., Ltd. reserves the right to the final interpretation of the above terms.