RR9299TZF-F1 is a high performance ISO/IEC 15693 protocol HF reader. It is designed upon fully self-intellectual property. Based on Aquilaware platform with full Digital-Signal-Processing (DSP) architecture and proprietary efficient DSP algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as smart book shelf, intelligent library management, new retail machine, logistics, access control, anti-counterfeit and industrial production process control system.
Model
Size
RR9299TZF-F1
FEATURES
lSelf-intellectual property;
lAquilaware full digital signal processing architecture without manual adjustment;
lSupport ISO/IEC 15693 compatible protocol;
lRF output power adjustable from 0.5~5W (7W);
lAdvanced anti-collision algorithm with high identification rate up to 80pcs/s;
lSupport 1 standard 50ohm RFID antennae with effective distance up to 90cm*;
lSupport antenna quality and status check;
lSupport RS232 and TCPIP interface;
lProvide DLL and demonstration software to facilitate development;
lSupport on-the-site firmware upgrading.
*Effective reading distance and tag interrogation speed are directly related to the antenna, tags, and the working environment.
CHARACTERISTICS
l Absolute Maximum Ratings
ITEM | SYMBOL | VALUE | UNIT |
Power Supply | VCC | 28 | V |
Operating Temp | TOPR | -25 ~ +65 | ℃ |
Storage Temp | TSTR | -40 ~ +85 | ℃ |
l Electrical and Mechanical Specification
Under TA＝25℃，VCC＝+5V unless specified
ITEM | SYMBOL | MIN | TYP | MAX | UNIT | |
Power Supply | VCC | 12 | 24 | 26 | V | |
Current Dissipation | IC | 0.2(0.5W) | 0.5(5W)/0.6(7W) | A | ||
Frequency | FREQ | 13.56 | MHz | |||
Effective Distance* | DIS | 90 | 100 | mm | ||
GPI Input | VIH VIL | 2.4 0 | - | 3.3 0.9 | V | |
Relay | Rated Load | CLOAD | 0.5A at 125VAC 1A at 24VDC | V | ||
Operating Voltage | 125VAC 60VDC | |||||
Operating Current | 1 | A | ||||
INTERFACE
Red: ON for normal work and BLINKING for abnormal warning such as antenna broken.
Blue: ON for command executing and OFF for idle state.
UART (RS232 DB9 Female)
No. | Symbol | Comment |
1 | GPI | General Input with TTL level and internal 40k resistor pulled up to 3.3V |
2 | TXD | RS232 data output |
3 | RXD | RS232 data input |
4 | NC | Reserved |
5 | GND | Ground |
6 | NC | Reserved |
7 | CM | Relay common node |
8 | NC | Relay normal-close node |
9 | NO | Relay normal-open node |
TCPIP network (RJ45)
SMA antenna port ANT1
MECHANICAL DATA (UNIT:mm)
Remark:
1. Specifications are subject to change, please pay attention to our latest version.
2. Shenzhen RoyalRay Science and Technology Co., Ltd. reserves the right to the final interpretation of the above terms.